sc02s/d series 2w dc/dc converter, smd-package ds_sc02s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 82% ? smd package with industry standard pinout ? package size : single output 12.7 x 9.3 x 8.9 mm (0.5?x 0.37?x 0.35?) dual outputs 15.3 x 9.3 x 8.9 mm (0.6?x 0.37?x 0.35?) ? isolation voltage 1000 vdc ? operating temperature range ?40 to +85c ? low ripple and noise ? lead free, rohs compliant ? 3 years product warranty the sc02s/d series are miniature, smd package, isolated 2w dc/dc converters with 1,000vdc isolation. it offers short circuit protection and allows a wide operating temperature range of ?40c to +85c. these isolated dc/dc converters are the latest offering from a world leader in power systems technology and manufacturing D delta electronics, inc. with creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max. load @no load load regulation max. capacitive load @max. load model number vdc vdc ma ma ma(typ.) ma(typ.) % (max.) uf % sc02s0505a 5 400 8 519 11 47 77 sc02s0512a 12 165 3 488 11 10 81 sc02d0505a 5 200 4 519 12 10* 77 sc02d0512a 12 83 1.5 504 7 4.7* 79 sc02d0515a 5 (4.5 ~ 5.5) 15 66 1 501 60 7 4.7* 79 sc02s1205a 5 400 8 213 8 47 78 sc02s1212a 12 165 3 201 6 10 82 sc02d1212a 12 83 1.5 202 5 4.7* 82 sc02d1215a 12 (10.8 ~ 13.2) 15 66 1 201 30 5 4.7* 82 sc02s2405a 5 400 8 106 8 47 78 sc02s2412a 12 165 3 101 5 10 81 sc02d2412a 12 83 1.5 102 5 4.7* 81 sc02d2415a 24 (21.6 ~ 26.4) 15 66 1 100 15 5 4.7* 82 * for each output input characteristics parameter model min. typ. max. unit 5v input models 4.5 5 5.5 12v input models 10.8 12 13.2 input voltage range 24v input models 21.6 24 26.4 5v input models -0.7 --- 9 12v input models -0.7 --- 18 input surge voltage (1 sec. max.) 24v input models -0.7 --- 30 vdc reverse polarity input current --- --- 0.3 a input filter internal capacitor internal power dissipation all models --- --- 650 mw p1
ds_sc02s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc output characteristics parameter conditions min. typ. max. unit output voltage accuracy --- 1.5 4.0 % output voltage balance dual output, balanced loads --- 0.1 1.0 % line regulation for vin change of 1% --- 1.2 1.5 % load regulation io=20% to 100% see model selection guide ripple & noise (20mhz) --- 100 120 mv p-p ripple & noise (20mhz) over line, load & temp. --- --- 200 mv p-p ripple & noise (20mhz) --- --- 15 mv rms temperature coefficient --- 0.01 0.02 %/ short circuit protection 0.5 second max. general characteristics parameter conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 1000 --- --- vdc i/o isolation resistance 500 vdc 1000 --- --- m ? i/o isolation capacitance 100khz, 1v --- 60 100 pf switching frequency 50 100 120 khz mtbf (calculated) mil-hdbk-217f@25 , ground benign 2,000,000 --- --- hours moisture sensitivity level (msl) ipc/jedec j-std-020d level 3 recommended input fuse 5v input models 12v input models 24v input models 1000ma slow-blow type 500ma slow-blow type 200ma slow-blow type environmental specifications parameter conditions min. max. unit operating temperature range (with derating) ambient -40 +85 case temperature --- +90 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 300 power derating curve output power (%) notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20mhz. 3 these power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 all dc/dc converters should be externally fused at the front end for protection. 5 specifications subject to change without notice. p2
ds_sc02s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc mechancial drawing i mechanical dimensions (single ouput) connecting pin patterns mechancial drawing ii mechanical dimensions (dual output) connecting pin patterns ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pins 0.05(0.002) pin connections physical outline pin single output dual output case size (single output) : 12.7x9.3x8.65mm (0.50x0.37x0.34 inches) 1 -vin -vin case size (dual output) : 15.3x9.3x8.65mm (0.60x0.37x0.34 inches) 2 +vin +vin case material : molding (flammability to ul 94v-0 rated) 4 -vout common 5 +vout -vout weight (single output) : 1.5g 7 no pin +vout weight (dual output) : 2.2g 8 n/a no pin 10 no pin na n/a : not available for electrical connection p3 9.3 [0.37] 11.8 [0.46] 12.7 [0.5] 2.57 [0.1] 2.54 [0.1] 5.08 [0.2] 8.9 0.5 [0.35 0.02] 12 4 8 5 0.60 [0.02] 0.25 [0.01] 8.6 [0.34] 10.0 [0.39] 8.65 [0.34] ( magnification of a ) 0.25 [0.01] r 0 . 5 0 ~ 4 s seating plane 0.15 s a 9.3 [0.37] 11.8 [0.46] 15.3 [0.6] 2.54 [0.1] 5.08 [0.2] 8.9 0.5 [0.35 0.02] 1 2 4 10 7 0.60 [0.02] 0.25 [0.01] 2.54 [0.1] 5 8.65 [0.34] 2.54 [0.1] ( magnification of a ) 0.25 [0.01] r 0 . 5 0 ~ 4 8.6 [0.34] 10.0 [0.39] sseating plane 0.15 s a 11.4 [0.45] 1.7 [0.07] 7.62 [0.30] 1.0 [0.04] 2.54 [0.10] 11.4 [0.45] 1.7 [0.07] 7.62 [0.30] 2.54 [0.10] 1.0 [0.04]
ds_sc02s/d_03152012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc part numbering system s c 02 s 05 05 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a two (3) years limited warranty. complete warranty information is listed on our web site or is available upon req uest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice. p4
|
